Products - Industrial Wireless Remote Controls - Air-Eagle SR Plus - Short Range (600 Ft.)
Receivers (Air-Eagle SR Plus)
BWI Eagle Air-Eagle SR Plus single or multi-channel receivers use dry-contact relay outputs for control of equipment. Our standard receivers are made with SPDT dry contact relays outputs. They are capable of switching AC or DC voltages up to 5 amps. Choose receivers with 1, 4, 8 or 16 independent relays.
The default relay operation is “maintained momentary” – commonly referred to as “dead man”, meaning the relay will remain energized while the button is depressed. Some units allow the user to select other relay modes, but ALL receivers can be custom programmed for any type of relay operation. For example, you can choose any combination of these and other options:
- Maintained Momentary
- Toggle Latching
- Latching
- Dual Relay Activation
- On or Off Delay Timers
Note: All Air-Eagle SR series receivers are designed to operate with all Air-Eagle SR series and all Air-Eagle SR Plus series Transmitters.
Single Relay
38-20100-ACAir-Eagle SR |
38-20100-DCAir-Eagle SR |
38-20100-X-ACAir-Eagle SR |
38-20100-X-DCAir-Eagle SR |
Four Relay
38-2000-ACAir-Eagle SR |
38-2000-DCAir-Eagle SR |
38UL-2000-DCSGS Certified |
38-2000-VBR-ACAir-Eagle SR |
38-2000-VBR-DCAir-Eagle SR |
Eight Relay
38-20800-ACAir-Eagle SR |
38-20800-DCAir-Eagle SR |
38UL-20800-DCSGS Certified |
Sixteen Relay
38-21600-ACAir-Eagle SR |
38-21600-DCAir-Eagle SR |
Specialty
38HC-2000Air-Eagle SR |
38HC-2000-DCAir-Eagle SR |